clicker 2 for STM32 Board

clicker 2 for STM32 Board
Made in: MikroE
Price: Contact
Status: Contact
view: 2441

CLICKER 2 FOR STM32

Thousands of possibilities

CLICK BOARD COMBINATIONS

With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 180 add-on boards. Blend different functionalities together and come up with new and original inventions. That’s just two clicks and your project is half-way done. Go ahead and play with a few ideas right away:

Processing Your Imagination

clicker 2 is powered by an STM32F407VGT6, a 32-bit ARM® Cortex®-M4 MCU that operates at up to 168MHz, has 1MB of flash and 192+4KB of SRAM.

Having two mikroBUS™ sockets and an additional connection pad, clicker 2 for STM32 utilizes all of the STM32F407VGT6’s I/Os. Each mikroBUS™ socket has its own SPI, UART and I2C lines; the 1x26 connection pads on the edges of the board share SPI and UART lines with the second mikroBUS™ socket.

Powering Your Inventions

Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-2 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a charger for the li-po battery. It can also maintain an independent power supply to the MCU’s RTC even when you push the RESET button or toggle the ON/OFF switch.

Expanding Your Ideas

No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.

Hardware Debugging

Efficiently erradicate any bugs and iron out your code until it’s wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for STM32®. It’s a fast hardware debugger and programmer with outstanding performance. Especially when used together with our ARM® compilers.

HID Bootloader Inside

To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you’re ready to upload your firmware.

Hardware Debugging

HID Bootloader Inside

Tech specs

Pushbuttons, signal LEDs, jumpers, pads for connecting an external ON/OFF switch, here are all the bits and details at your disposal: