AVRPLC16 v6 is a AVR based PLC system with 8 opto-inputs and 16 relays (for currents up to 16A).
USB 2.0 AVR programmer on-board with simplified driver installation and usage.
GPS communication is available ifTelit GM862-GPS and GPS antennaare placed on-board.
This board is Ethernet enabled via on-board ENC28J60 (Ethernet Module that uses SPI communication).
Use GSM/GPRS communicationvia Telit GM862 GSM/GPRS module that can be placed on-board.
RS-232 communicationis available via onboardMAX232 and screw terminal used for connecting.
System can be easily configured via marked DIPswitches. Each DIP switch configures a part of the system.
On-board 3.3V Voltage Regulator provides stable power supply for Serial Ethernet module.
Precise analog input measurement is done viaMCP3204 (12-bit Analog-to-Digital Converter with SPI interface).
High efficiency Switching unit enables stable power supply. Also there is aswitch for turning on and off system.
All pins are connected toIDC10 connectors for further expansion and connecting to external circuits.
There are 2 Antenna holders on-board for connecting various types of GSM and GPS antennas.
8 electrically isolatedinput lines withoptocouplers (fast HP2630 optocouplers with Smitth trigger).
DIP switch is available on-board for easy separating port pins from Pull up or Pull down resistors.
There are connectors on-board for in-circuit debugging and programming with AVR ISP and JTAG.
Telit GM862 GSM/GPRS module can be connected to system via on-boardGSM/GPRS Connector.
Speaker and microphoneconnects via screw terminal to GSM/GPRS module audio peripherals.
External circuits can be controlled via 16 relays(for currents up to 16A). Each Relay have LED for optical signalization.
On-board ULN2803 (High-current Darlington arrays) are used for driving output relays.
All pins are marked on the back of the board. These marks provide information about connections.
MMC/SD memory cards can be placed in on-boardMMC/SD Card Slot which is connected to microcontroller pins.
On-board TL7705Amonitors the power supply for undervoltage conditions at the SENSE input.
User can choose betweendevelopment andproduction mode using on-board jumpers.
AVRPLC16 v6 supports Telit GSM/GPRS modules: GM862-GPS, GM862-QUAD-PY and GM862-QUAD. These module can be easily mounted on-board via connector. Also they can be connected to GSM and GPS antennas.
Note: Telit GM862 GSM/GPRS modules, cables and antennas are sold separately.
Board is connected to Ethernet via on-boardENC28J60 (28-pin, 10BASE-T stand alone Ethernet Controller with an SPI interface).
This AVR board has USB 2.0 AVR programmer called AVRprog2. This USB AVR programmer doesn't use boot loader or any similar way of programming. The whole AVR memory and all pins are available for your application. Aside from that, this programmer is fast and easy to use InSystem programmer. This AVR Programmer is driven and powered from a single USB port on your computer. No additional AC power adapter is needed.
The programmer is recognized by Windows, which simplifies driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP). Also External Programmer and JTAG can be connected with this PLC system, which allows external in-circuit debugging and programming of on-board AVR microcontroller.
Drivers for the on-board programmer are Microsoft® Windows® XP, Windows® Vista and Windows® 7 certified. The Windows certificate is a proof that the programmer supports mentioned Windows operating systems and is immediately recognized by the system, which guarantees correct Plug and Play functionality. Driver certification provides users with a wide range of benefits such as stable functioning, the ability to install and delete drivers without rebooting and compatibility with future versions of Windows.
The PLC System is packed in the protective box along with documentation and software CD. This box is very ressistant to any kinds of damages and shocks. Note: Telit GM862-GPS module with antennas and cables, UTP Cable, CAN-SPI board, MMC/SD card are sold separately. Package contains:
Accessory Boards were designed to allow students or engineers to easily exercise and explore the capabilities of the various microcontrollers with peripheral devices such as: ADC, DAC, CAN, Ethernet, IrDA, MP3, RS485 and many more. Click on the image below to find accessory boards that suits your needs. Note: Accessory Boards are sold separately.