MIKROE-1670
Four-wheeled clicker 2 or mikromedia work station
Three additional click board sockets, additional outputs, mounting holes
Open source Android app to jump-start your development
A motorized development platform
8-bit, 16-bit, 32-bit, ARM, PIC, AVR? With the MikroE Buggy you’ll be on your
own terrain – it’s essentialy a four-wheeled mikromedia or clicker 2 workstation.
Once you attach the board of your choice, the Buggy becomes
a battery-powered motorized development platform – with plenty options
to equip and modify it with additional functionality.
You won’t get a speeding ticket on the road for it, but when it comes to getting
from 0 to prototype, these are the hottest wheels around.
It has the looks — and the features
Differential drive - pairs of motors are divided by left and right axis. Steering is controlled by varying the relative rate of rotation between the left and right side.
LiPo Battery
Choose your driver
The Buggy needs a microcontroller to operate. The connector socket is the driver’s seat,
compatible with both our dual-mikroBUS clicker 2 boards and with our range of 12 mikromedia
boards with touchscreens and a multitude of modules.
Here’s the selection:
Make it unique
click boards will make each Buggy unique and different. There are more than a 100 clicks available, and among them are all types of sensors and transceivers. The Buggy has three mikroBUS sockets, plus two more if a clicker 2 board is attached. Browse the selection to get some ideas: http://www.mikroe.com/buggy/
Download App and go for a ride
If you want to take your Buggy for a spin as soon as possible, attach BLE P click to one of the three mikroBUS sockets,
and install the free Buggy Android app on your nearest Bluetooth Low Energy compatible smartphone or tablet. The
source code is available for free. Use it to tailor the app for any number of specific uses you intended for the Buggy.
If you purchase a Buggy kit with a clicker 2 board, the firmware is preinstalled. Otherwise,
Download it from here.
Download Android App [Google Play]
Download App source code [364kb]
What you get?
The Buggy comes disassembled in the box. Shown here are all the components you
need to assemble the Buggy before adding a clicker 2 (or mikromedia) and click boards.
You’ll need one of those to start working with Buggy anyway, so if you don’t have a
clicker 2 or mikromedia already, scroll down to see the kits we’re offering.
You can consider select the complete kits as the below:
MIKROE-1771
Buggy + clicker 2 for STM32 + Bluetooth click
MIKROE-1772
Buggy + clicker 2 for PIC18FJ + Bluetooth click
MIKROE-1749
Buggy + clicker 2 for STM32 + BLE P click
MIKROE-1750
Buggy + clicker 2 for PIC18FJ + BLE P click
MIKROE-1828
Buggy + clicker 2 for PIC32MX + BLE P click
MIKROE-1830
Buggy + clicker 2 for FT90x + BLE P click
MIKROE-1829
Buggy + clicker 2 for PIC32MX + Bluetooth click
MIKROE-1831
Buggy + clicker 2 for FT90x + Bluetooth click