Xuân Vinh Tech - Arduino & Module

• Bo clicker 2 for PIC18FJ
• Xuất xứ: MikroE
• Giá: Liên hệ
• Tình trạng: Liên hệ
• Lượt xem: 2315

CLICKER 2 FOR PIC18FJ

Thousands of possibilities

CLICK BOARD COMBINATIONS

With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 180 add-on boards. Blend different functionalities together and come up with new and original inventions. That’s just two clicks and your project is half-way done. Go ahead and play with a few ideas right away:

Processing Your Imagination

clicker 2 for PIC18FJ is powered by Microchip’s 8-bit PIC18F87J50 MCU. It has up to 12 MIPS of operation, 128KB of program memory and 3.904 bytes of RAM.

Powering Your Inventions

Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-2 IC will provide 3.3V or 5V to the clicks. It also turns the USB port into a battery charger. For convenience, clicker 2 for PIC18FJ features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch).

Expanding Your Ideas

No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.

Hardware Debugging

Efficiently erradicate any bugs and iron out your code until it’s wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for PIC®. It’s a fast hardware debugger and programmer with outstanding performance. Especially when used together with our PIC® compilers.

HID Bootloader Inside

To make your prototyping experience as convenient as possible, clicker 2 for PIC18FJ is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you’re ready to upload your firmware.

Hardware Debugging

Efficiently erradicate any bugs and iron out your code until it’s wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for PIC®. It’s a fast hardware debugger and programmer with outstanding performance. Especially when used together with our PIC® compilers.

HID Bootloader Inside

To make your prototyping experience as convenient as possible, clicker 2 for PIC18FJ is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you’re ready to upload your firmware.

Tech specs

Pushbuttons, signal LEDs, jumpers, pads for connecting an external ON/OFF switch, here are all the bits and details at your disposal:

Processor

• - PIC18F87J50, 12 MIPS of operation
• - 128KB program memory
• - 3.904 bytes RAM

Connectivity

• - 52 programmable GPIOs
• - 2 mikroBUS host sockets
• - USB MINI-B connector

Documentation and examples

Download Examples [333KB]

Download User Manual[6.61MB]

Download USB HID Bootloader [855KB]

Download mikroProg Suite for PIC [5.90MB]

What’s in the package?