Xuân Vinh Tech - Arduino & Module

• Bo clicker 2 for PIC32MX
• Xuất xứ: MikroE
• Giá: Liên hệ
• Tình trạng: Liên hệ
• Lượt xem: 2454

CLICKER 2 FOR PIC32MX

Thousands of possibilities

CLICK BOARD COMBINATIONS

With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over a 180 add-on boards. Blend different functionalities together and come up with new and original inventions. That’s just two clicks and your project is half-way done. Go ahead and play with a few ideas right away:

Processing Your Imagination

clicker 2 for PIC32MX is powered by Microchip’s 32-bit PIC32MX460F512L MCU. It operates at 80MHz/105DMIPS, has 512+12KB of program memory and 32KB of RAM.

Powering Your Inventions

Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for PIC32MX features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch).

Expanding Your Ideas

 

No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.

Hardware Debugging

Efficiently erradicate any bugs and iron out your code until it’s wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for PIC®. It’s a fast hardware debugger and programmer with outstanding performance. Especially when used together with our PIC32® compilers.

HID Bootloader Inside

To make your prototyping experience as convenient as possible, clicker 2 for PIC32MX is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you’re ready to upload your firmware.

Hardware Debugging

Efficiently erradicate any bugs and iron out your code until it’s wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for PIC®. It’s a fast hardware debugger and programmer with outstanding performance. Especially when used together with our PIC32® compilers.

HID Bootloader Inside

To make your prototyping experience as convenient as possible, clicker 2 for PIC32MX is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you’re ready to upload your firmware.

Tech specs

Pushbuttons, signal LEDs, jumpers, pads for connecting an external ON/OFF switch, here are all the bits and details at your disposal:

 

 Processor

• - PIC32MX460F512L
• - 80MHz/105DMIPS of operation
• - 512+12KB program memory

Connectivity

• - 52 programmable GPIOs
• - 2 mikroBUS host sockets
• - USB Mini-B connector

Documentation and examples

Download Examples [218KB]

Download User Manual [6.61MB]

Download USB HID Bootloader [1.05MB]

Download mikroProg Suite for PIC32MX [5.90MB]

What’s in the package?

 

Package dimensions: L 102mm, W 80mm, H 17mm

Package weight: ~50g